TOP RATED TILE INSTALLERS STRATHAM NH

Our price always vary depending on the size, number or outlets, design, type of tile and replacement of the old backsplash.

The cost to install a backsplash can vary significantly depending on a number of factors, including the type and size of tiles used, the complexity of the design, the condition of the surfaces to be tiled, and the location of the project. In general, you can expect to pay anywhere from $10 to $40 per square foot for backsplash installation, with an average cost of around $25 per square foot.

Some of the factors that can influence the cost of backsplash installation include:

• Type of tiles: Different types of tiles, such as ceramic, stone, or glass, can vary in price. More expensive tiles will typically cost more to install.

• Size of tiles: Larger tiles may require fewer grout lines, which can reduce the overall cost of installation.

• Design complexity: A simple backsplash with straight edges and a straightforward layout may be less expensive to install than one with a more complex design or irregular shapes.

• Condition of surfaces: If the surfaces to be tiled are in good condition and do not require any additional preparation, the cost of installation may be lower. If the surfaces are uneven or in poor condition, additional work may be needed, which can increase the overall cost.

• Location of project: The cost of labor can vary depending on the location of the project. In general, backsplash installation may be more expensive in urban areas or regions with a high cost of living.

It is important to keep in mind that these estimates are general and that the actual cost of your backsplash installation may be higher or lower depending on your specific project. It is always a good idea to get multiple estimates from different contractors to get a better idea of the costs involved.

For more information you can read our guide about tile installation cost.

1. Tile- buy 10% extra
2. Thinset (adhesive)
3. Grout
4. Caulk
5. Sealer- if you have stone tile

We also install tile for floors, bathroom walls, fireplaces, and any other locations in your home.

The average labor costs to install tile in Stratham, NH ranges from $5 to $17 per square foot. It is from $7 to $29 per square foot when adding subfloor. Your price depends on the size and type of tiles installed.

For a backsplash it usually takes 2-3 days from start to finish.

Usually, it depends on the area that needs tile installation. Big floors can be calculated per square foot, somewhere between $10-$20. Backsplashes and fireplaces are usually estimated by project, not by square foot.

Ceramic and porcelain are the most popular tile materials for backsplash.

Calculate the area of each wall by multiplying the length by the width for the total square feet. Then add the total for all the walls you plan to tile for the backsplash. We advise you to add 10%-20% for cuts and breakage.

Calculate the area by multiplying the length of the room by the width for the total square feet. Then add 20 percent for cuts and breakage.

Porcelain, ceramic, metal, and glass tile are low maintenance because they resist staining, are naturally nonporous, and don’t require any special cleansers to do the job.